-40%

mAT-30 HF Auto-tuner 120W Antenna Automatic AUTO TUNER For Yeasu Ham Radio

$ 80.25

Availability: 100 in stock
  • Return shipping will be paid by: Seller
  • Model: mAT-30
  • Country/Region of Manufacture: China
  • All returns accepted: Returns Accepted
  • Condition: New
  • Refund will be given as: Money Back
  • Item must be returned within: 30 Days
  • Brand: Unbranded
  • MPN: Does Not Apply
  • Restocking Fee: No

    Description

    Parameters:
    Maximum power: 120 w
    Working frequency: 3M-54MHz
    Working mode: fully automatic
    Adjust standing wave: Most antennas can be adjusted to 1.5 standing waves
    Working power supply: use Yaesu radio frequency adjustment interface power supply, no external power supply required
    Antenna impedance: 5-1500 ohms
    Appearance size: 13cm wide, 20cm long, 4cm high
    Approximate weight: 800 g
    Features:
    1. This equipment is specially designed for Yaesu Yaesu short-wave radio station. It is fully compatible with Yaesu special day adjustment. The method of use is exactly the same as that of the original factory. It can be operated directly through the radio panel, which is very convenient. A dedicated data cable is included, which can be directly connected to the eight-core control socket on the back of the Yaesu radio station. The radio can automatically control the sky adjustment work without additional manual setting and operation.
    2, the hardware shell uses the latest ultra-thick aluminum plate shell, the front and rear panels are aluminum milling and oxidation process, beautiful and beautiful, durable.
    3. The input RF frequency detection function is added, which makes the tuning speed faster and more accurate. When re-entering the previously used frequency, the tuning of the day adjustment is completed in an instant.
    Supports long-line antennas. For the FT-891 short-wave machine, due to its own characteristics, only the mAT-30 day adjustment can be used to tune the antenna with a standing wave ratio higher than 3, using other day adjustments, including the original FA-30 day adjustment of Yaesu. It is impossible to tune an antenna with a standing wave ratio higher than 3.
    Attachment: Dedicated data line
    Different models of instructions
    A, FT-857D/FT-897D
    1. Press and hold [F] for more than one second to enter the menu mode.
    2. Rotate the [MEM/VFO CH] knob to find NO-001 [EXT MENU] and rotate the [DIAL] knob, which is the largest knob, set to "ON".
    3. Rotate the [MEM/VFO CH] knob to find NO-020 [CAT/LIN/TUN] and rotate the [DIAL] knob to set to "TUNER".
    4. Rotate the [MEM/VFO CH] knob to find NO-085 [CAT/LIN/TUN] and rotate the [DIAL] knob to set to "TUNER".
    5. Press and hold [F] for more than one second to save the settings.
    The above method is applicable to mAT-30, as well as Yausu FC-30 and FC-40.
    B, FT-450D
    1. Press and hold the [F] key for more than one second to enter the menu mode and the screen displays “MENU”.
    2. Rotate the [DSP/SEL] button and select “TUNER”.
    3. Press the [DSP/SEL] button to enter the “TUNER” submenu.
    4. Rotate the [DSP/SEL] button again to select “EXT ATU”.
    5. Press and hold the [F] button for more than one second to return.
    The above method is applicable to mAT-30 and Yeasu FC-40 days. In particular, because the FT-450D is particularly sensitive to standing waves, the actual test found that the station does not support the Yaesu FC-30 day adjustment.
    C, FT-950
    1. Press the [MENU] button to enter the menu mode.
    2. Rotate the [SELECT] button to select “110 TGEN EXT TUN”.
    Tip: The menu switches between “110 TGEN” and “EXT TUN” by pressing the [SELECT] button.
    3. Rotate the [CLAR/VFO-B] button and select “Etu”.
    4. Press and hold the [MENU] button for more than one second to save the settings and return.
    D, FT-891
    Setting
    1. Press and hold [MULTI] to enter the setup menu.
    2. Rotate [MULTI] to select 16-15"TUNER SELECT" option, short press [MULTI] to activate this option, rotate [MULTI] to select "EXTERNAL", then press [MULTI] to exit the setting.
    Operation
    1. Press the [F] key momentarily to select the FUNCTION-1 page.
    2. Rotate [MULTI] to move the arrow to the TNR position. Press [MULTI] to switch the online/offline of the sky tone; long press to activate the tuning.
    Other models have not been verified, but if equipped with an 8-core CAT or TUNER socket, theoretically supportable, we will continue to verify each model.
    Package include:
    1PC mAT-30
    1pc cable
    Payment
    We accept PayPal only.
    We only ship item to your PayPal verified address.
    Payment must be received within 3 days from the date of purchase.
    Orders will be processed and dispatched within 3 days normally
    Terms Of Sales
    1. Our listing price includes the value of goods,packaging cost,and export
    taxes,not including international import duties.
    2. Import duties,taxes,and charges are not included in the item price or shipping fee.
    3. The import duties are buyers' responsibility.Please check with your country's
    customs office determine what these additional costs will be prior to your
    purchase.
    4. All disputes arising from the import duties will be submitted to eBay for solution.
    Feedback
    Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.
    Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.
    We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.Thanks!
    Contact Us
    We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders.