-40%
10 Cherry E13 15A N/Open Snap Action Pushbutton Micro Switches 125/250 VAC Dryer
10 Cherry E13 15A N/Open Snap Action Pushbutton Micro Switches 125/250 VAC Dryer
10 Cherry E13 15A N/Open Snap Action Pushbutton Micro Switches 125/250 VAC Dryer
10 Cherry E13 15A N/Open Snap Action Pushbutton Micro Switches 125/250 VAC Dryer
10 Cherry E13 15A N/Open Snap Action Pushbutton Micro Switches 125/250 VAC Dryer
10 Cherry E13 15A N/Open Snap Action Pushbutton Micro Switches 125/250 VAC Dryer
10 Cherry E13 15A N/Open Snap Action Pushbutton Micro Switches 125/250 VAC Dryer
10 Cherry E13 15A N/Open Snap Action Pushbutton Micro Switches 125/250 VAC Dryer

10 Cherry E13 15A N/Open Snap Action Pushbutton Micro Switches 125/250 VAC Dryer

$ 10.55

Availability: 117 in stock
  • SELLER LOCATION: USA
  • MPN: 0E1349EC
  • Max Amps: 15A
  • Switch Action: Momentary
  • Type: Switches
  • Termination Type: 1/4" Quick Connect
  • Operation: Normally Open, Snap Action
  • All returns accepted: Returns Accepted
  • Condition: New
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Buyer
  • Compatible Model: E13
  • Max Volts: 250 VAC
  • Refund will be given as: Money Back
  • Contact Material: Silver-Cadmium Oxide
  • Standards/Compliance: UL CSA
  • Brand: Cherry Electrical

    Description

    3472B3F.32
    New Cherry 15 Amp, 125 Volt / 250 Volt, Normally Open, Button Type MicroSwitches, Part Number 0E1324EC, Item Number 0E1349EC.  Each bid quantity is for a Lot of Ten (10) Switches.  You may bid / buy any number of lots, up to the total quantity available above.
    These switches were purchased from an industrial liquidator earlier this year, and they were brand new in the original factory boxes.  We repackaged them into 4-mil Ziplok bags for resale.  These are nice sturdy switches for a multitude of applications.  The contacts are Normally Open.  That is to say, no current flows through them until the button is pressed.  Press the button and the light comes on, electric motor starts running, etc.
    Written on the switch
    :
    CHERRY
    E13 P CHINA
    (Underwriters Recognized certification mark)
    15A 125 or 250 VAC
    (CSA certification mark)
    3/4 HP 125 VAC, 1-1/2 HP 250 VAC 51-02
    According to the calipers
    :
    Overall length:  2.658" / 67.52 mm
    Length (excluding terminals):  1.865" / 47.38 mm
    Width:  .652" / 16.56 mm
    Overall height:  .839" / 21.31 mm
    Height (excluding button):  .646" / 16.42 mm
    Mounting holes:  #6 machine screws, spaced 1.000" OC (on centers)
    According to the manufacturer
    :
    E13 SERIES
    Specifications
    Temperature Rating: 105°C
    Flammability Rating: UL94HB
    Materials: -- Case: General Purpose Phenolic
    -- Actuating Button: Thermoplastic Nylon
    -- Common Terminals: Brass
    -- Moving Blade: Brass
    -- Spring: Stainless Steel
    -- Contacts: Silver-Cadmium Oxide
    UL1054 Rating: 15A, 125/250VAC; 3/4HP, 125VAC 1-1/2HP, 250VAC; 2A 48VDC
    Terminals: Standard 0.250" x 0.032" (6.35mm x 0.81mm)
    Mounting
    -- Recommended mounting screw: #6-32 round head
    -- Recommended torque on screw: 6 inch-lbs. max
    -- Recommended maximum torque for ferrule: 20 inch pounds
    Maximum Operating Force (g): 425
    Max. Pre-Travel inches (mm): 0.050 (1.27)
    Operating Point inches (mm): 0.285 +/-0.020 (7.24 +/-0.51)
    Min. Over-Travel inches (mm): 0.100 (2.54)
    Max. Movement Differential inches (mm): 0.015 (0.38)